|
Photos and Story by Jody Campbell
VisionX's Off Road LED Lighting System
Here in Arizona, our primetime rock crawling season is a
little backwards from most of the U.S. since the best time
of the year is the dead of winter. The winter months are
perfect-75 degrees, sunny most days, and little chance for
rain. Conversely, the summer months are tough on
equipment-115 degrees ambient temperature, idling your rig
all day at 2 m.p.h., no breeze… the oppressive heat will tax
the driver and the very best cooling system. So when I feel
the wheeling bug nipping at me during the scorching summer,
the preferred option is an after-dark adventure, but it's
tough to see those pesky boulders under your rig.
Over the years I've experimented with many different types
of under-carriage lighting for darkness direction. I have
tried everything from el-cheap auto parts store lights, to
heavy-duty tractor lights, and everything in between. Three
problems seem to always radiate from those incandescent
illuminators:
1. the lights draw way too much power from an already
overburdened electrical system
2. they are too-big, difficult to protect and break
frequently
3. They tend to be too bright and reflections destroy night
vision
Well, I think I have found a cure to all three of these
problems with the help of Vision-X Lighting. Our trusty
editor has already explored one LED option on the market,
but I found another for us to test-similar in theory, but
different in application.
Vision-X lighting has a specially designed off-road LED
lighting kit called "Tantrum", but in reality they could be
used on any vehicle with a 12-volt source. The Tantrum kit
contains 8 light pods measuring 1.75" in diameter. Each pod
contains 15 individual 1.5 mm LED's, for a whopping grand
total of 120 super-bright, white LED's. The aluminum LED
pods are fully potted-meaning that they are sealed inside a
tough, waterproof, clear resin. Each pod weighs about 4
ounces, and draws only 2 watts of power (as compared to a
standard 55 watt light) for a total of 16 watts or 1.6 amps
for everything. The kit also includes a control box, a
cigarette lighter adapter and a wireless remote.
|
Installation - VisionX Off Road
LED System |
|
Time: |
30 Minutes to 1
Hour |
|
Tools Needed: |
Screwdriver,
drill, drill bits, wire crimpers |
|
Difficulty: |
 |
Installation
Mounting is simple; the
kit comes with 3M
adhesive on the back of
each pod, and 2 small
screws. Simply press the
adhesive on the back,
stick it to a clean
surface, and then drill
two small holes to
secure the lights. Each
light pod comes with a
10', sealed control wire
already connected and
sealed to the pod.
Simply route the wires
out of harms way and
plug them into the
control box, plug the
adapter into a cigarette
lighter and the system
is ready to use. We
chose to disassemble the
cigarette lighter
adapter and hard wire
the system to a 12 volt
fused source. |
|
|
|
The coolest part of the Tantrum system is in its use. The
control box performs a few unique functions and you can set
the lights to function in 3 different ways. They can be set
to "constant-on" for off-road use, they can be set to all
blink simultaneously at an adjustable speed, or they can be
set to blink in sequence around your vehicle, ala disco
lights! The control box also has a built in microphone to
interface with your stereo to time the lights with the beat
of the music. All of these functions can be controlled with
the small, key fob remote control, from up to 1000 feet
away. Yeah I know, not really practical for wheeling, but it
sure looks cool when you park at night to enjoy a beverage
or two. In the constant on position, the LED pods produce a
bright, semi-direct light that creates a circular pattern
around the Jeep that I have adjusted to a 20 foot area
around the Jeep with most of the light being directed in the
areas around the tires. Positioning the lights for optimal
lighting is key, since they are designed to be flush
mounted.
I used the adhesive backing provided to test different
mounting options, and then when I felt I had the lights
aimed correctly, I drilled and permanently mounted them.
With all 8 pods mounted, the Jeep has a bright white glow
that extends completely around it, perfect for night
wheeling. This set up is perfect for night rock crawling and
trail rides. The lights also work great for loading and
unloading camping and hunting gear at night, providing an
even wash of light around the vehicle.
The Verdict
120 LED's, durable sealed pods, and a retail price under
$200 the Tantrum lighting system is definitely the hottest
lighting deal on the market. The only recommendation I have
for the Tantrum kit, is it could include 2 light pods
designed as spot lights to throw some light out in front of
the rig, and leave the other 6 as flood lights. Other than
that, the kit is well designed, tough, and easy to install.
If you're looking for the ultimate all-in-one LED light kit
to give your off-road rig the perfect undercarriage
lighting, give Vision-X lighting a call, or click on the
below listed link to check out all the other lighting
products they make for your rig. |