7″ VX LED Headlight Installation Instructions

H4 adapter or other wiring adapter should be used to power headlight

FEATURES
1. Fits on Jeeps, Classic Cars
2. Multiple Wiring Connectors Available
3. Halo LED Ring

7” VX SERIES SPECIFICATIONS
1. Warranty : Extended
2. Amp Draw : High 1.5A / Low 1.1A / Halo 0.17A @ 12V
3. Approval : DOT
4. Beam Patterns : High, Low, Halo
5. LED Lifespan : 50,000 Hours

PREPARATION
1. We recommend completely reading instructions before installing.
2. Consult your local state regulatory agency regarding the use of LED
lighting.
3. The placement of LED lighting should not restrict airflow to the radiator,
or block head lamps, turn signals, or parking lights.

MAINTENANCE
1. All Vision X models have been designed for maintenance free use. In the
case an LED lamp or other part replacement is needed please contact
your authorized service center.

HALO WIRING INSTRUCTION
1. Disconnect vehicle battery prior to installation
2. Review your vehicle manual for detailed instructions for removing existing
factory head light housing.
3. Attach VX LED Headlight to existing factory plug and re-install
according to your vehicles manual.
4. To wire the LED Halo Daytime Running light, locate the white wire on
the back of the VX light. Power the white wire by attaching it to the
accessory power of the vehicle if there isn’t accessory power available
affix it to the blue wire of the VX.

XIL-7RD WIRING DIAGRAM

To Continue Reading Click View

View